Polyester fabric Polyester Fabric Multi-Zip Coin and Card Pouch - SKU 7052
Black fabric purse front with round patch — Polyester fabric, SKU 7052
Grey purse angled to show parallel zips and circular pulls — Polyester fabric, SKU 7052
Black purse rear with plain fabric panel — Polyester fabric, SKU 7052
Grey purse rear with matching edge binding — Polyester fabric, SKU 7052
Black purse side with three zipper sliders and round tabs — Polyester fabric, SKU 7052
Grey purse face with circular patch and curved upper corners — Polyester fabric, SKU 7052
Click to enlarge
Polyester fabric Polyester Fabric Multi-Zip Coin and Card Pouch - SKU 7052
Black fabric purse front with round patch — Polyester fabric, SKU 7052
Grey purse angled to show parallel zips and circular pulls — Polyester fabric, SKU 7052
Black purse rear with plain fabric panel — Polyester fabric, SKU 7052
Grey purse rear with matching edge binding — Polyester fabric, SKU 7052
Black purse side with three zipper sliders and round tabs — Polyester fabric, SKU 7052
Grey purse face with circular patch and curved upper corners — Polyester fabric, SKU 7052
Black-and-white braided belt ends with black tabs and a rectangular silver-tone pin buckle — Nylon braid with PU leather end tabs, SKU 6972
Two-Tone Nylon Braided Belt with PU Leather End Tabs | SKU 6972
Back to products
Black wallet with banded front flap and small rectangular plate — Sheepskin leather, SKU 7221
Sheepskin Leather Wallet with Banded Front Flap | SKU 7221

Polyester Zip Purse with Round Pull Tabs | SKU 7052

Round PVC pull tabs and a matching circular patch give this polyester zip purse a consistent trim language. Its broad rectangular face is framed by binding that follows the rounded upper corners, with parallel zips along the top.

SKU: 7052 Categories: , Tags: , ,
Overview & OEM Use

The purse places its detail at the edges rather than across the body. Parallel zip tracks curve over the upper corners, and circular PVC pull tabs hang from the metal sliders. A centred round patch is the only feature on the otherwise plain front fabric.

The grey reference has a shallow, layered side profile and a matching bound outline. This restrained construction can sit within a fabric-accessory range without relying on a printed pattern. When comparing samples, consider the patch scale and pull-tab diameter together, as those repeated circles define the appearance more than the plain body panels.

Need an OEM quote for this product?

Send SKU 7052 with your target quantity, material request, logo method, and packaging notes.

Start OEM Inquiry
Specs & Customization

Product Details

SKU
7052
Product Type
Zip purse
Material
Polyester fabric
Color
Black / Grey
Structure
Rounded polyester fabric pouch with layered top and side zipper tracks, round PVC pull tabs, piped edges, circular front patch area, and gusseted side depth
Closure
Multi-zip closure
Strap
No strap; handheld small-accessory format
Dimensions
15x9.8x3.5 cm
Development Use
fabric color and handfeel; zipper tape color; round pull-tab shape; piping; logo patch method; lining option

Need an OEM quote for this product?

Send SKU 7052 with your target quantity, material request, logo method, and packaging notes.

Start OEM Inquiry
MOQ & Lead Time

SKU MOQ & Packing

MOQ
360 pcs / style / color
Pcs/Carton
120 pcs / carton
OEM/ODM Options
material, color, logo method, lining, card slot layout, coin pocket, snap button, zipper, packaging
Standard Packaging
Packaging is confirmed by product category and final project requirements.

Factory & Production Notes

Sample Cycle
Standard samples usually take 5-7 days after material, logo method and construction details are confirmed. Special materials, custom hardware, new molds, printed lining or complex packaging may extend timing.
Sample Fee
A base sample fee is charged. Once the applicable MOQ is reached, the sample fee may be partially or fully credited against the goods payment.
Bulk Lead Time
Bulk lead time is 60 days after order details are confirmed and the deposit is received.
Custom Hangtags / Packaging
Custom hangtags start from 2,000 pieces; other custom packaging is calculated by product category.
QC Standard
QC uses AQL 1.0 for major defects and AQL 4.0 for minor defects.
Shipping
Express, air, or sea freight depending on destination, order volume, and carton volume

Need MOQ, lead time, or packing confirmation for this SKU?

Start OEM InquiryView full MOQ, OEM & QC guide →

Related products

Black zip wallet with two stacked front zips and a top zip — PU leather, SKU 6051
Back of the black wallet showing a horizontal zip above a plain panel — PU leather, SKU 6051

Black PU Leather Zip Wallet with Stacked Front Zips

,
SKU 6051

This black PU leather wallet has a flat rectangular body with a top zip and two horizontal zips on the front. Another zip runs across the back, keeping the exterior layout distinct on each face. Tonal stitching and plain pullers keep attention on the multi-zip arrangement.

Black sheepskin pouch with rounded piped front and staggered upper zips — Sheepskin leather, SKU 4641
Back of the black pouch with one central vertical seam — Sheepskin leather, SKU 4641

Black Sheepskin Pouch with Rounded Piped Front

,
SKU 4641

A curved piped front gives this small black sheepskin pouch a softer outline than a straight-edged wallet. Two zip lines sit at different heights near the top, above a plain face with a small rectangular plaque. The rear has a single central seam.

Purple fabric purse with parallel zips and circular patch — Polyester fabric, SKU 6052
Purple purse front with matching round patch and rounded corners — Polyester fabric, SKU 6052

Polyester Multi-Zip Purse with Round Pull Tabs

,
SKU 6052

Parallel zip tracks define this purple polyester purse. Rounded corners, matching edge binding and a circular front patch keep the small rectangular body coherent, with round PVC pull tabs repeating the same colour.

Black folding bus pass holder with silver-tone corner pieces — PU leather, SKU 1051
Unfolded black cover with Bus Pass lettering and horizontal zipper — PU leather, SKU 1051

PU Leather Bus Pass Holder with Twin Windows

,
SKU 1051

This black PU leather bus pass holder folds over two clear display windows. Silver-tone corner protectors and Bus Pass lettering define the cover, while a horizontal zipper adds a separate detail to the reverse.

Tall black stitched pouch with gold-tone kiss-lock frame — PU leather, SKU 1764
Black frame pouch with irregular stitched panels — PU leather, SKU 1764

PU Leather Kiss-Lock Pouch with Stitched Panels

,
SKU 1764

An elongated black pouch with a gold-tone kiss-lock frame and irregular stitched panels. The PU leather body narrows into the frame at the top, creating a different profile from a conventional folding wallet or zip purse.

Black travel card holder with window and gold-tone lettering — PU leather, SKU 2051
Purple Travel Card cover with perimeter stitching — PU leather, SKU 2051

PU Leather Travel Card Holder with Clear Windows

,
SKU 2051

This folding PU leather travel card holder pairs clear display windows with a plain lettered cover. Black and purple references retain the same stitched rectangular outline, with Travel Card lettering providing a direct visual cue to the format.

Black wallet with zigzag-stitched flap and brass-tone plate — PU leather, SKU 3764
Black wallet rear with vertical zigzag panel joins — PU leather, SKU 3764

PU Leather Wallet with Zigzag-Stitched Panels

,
SKU 3764

Black PU leather panels joined by zigzag stitching give this wallet its distinctive surface. A rounded snap flap carries a brass-tone rectangular plate, while a separate top zip sits behind the flap-front section.

Pink purse with two pale front zip bands and silver-tone plate — Sheepskin leather, SKU 6391
Pink purse rear with one pale zip and centre seam — Sheepskin leather, SKU 6391

Sheepskin Leather Zip Purse with Contrast Zip Bands

,
SKU 6391

Pale zip bands stand out against the pink face of this sheepskin leather purse. Two horizontal front zips sit above a small silver-tone plate, giving the shallow rectangular shape a clear, linear design.